mBSP Flash Tool Steps & Downloads

    1) Prior To Performing The mBSP Flash Tool Procedure follow these steps (a, b, c & d):

        a) Configure Windows 10 To Not Go Into A Power Save Mode:   Adobe Acrobat (PDF) Format | Microsoft Word Format

        b) On Windows 10, Make Sure No Other Programs Are Running:   Adobe Acrobat (PDF) Format | Microsoft Word Format

        c) Install The Latest Driver For Your RP12 Adapter. The following web sites are available to download specific RP12 adapter drivers:

                        - Nexiq: https://www.nexiq.com/Home/Drivers  

                        - Noregon: https://www.noregon.com/adapter-drivers/

    3) Following the mBSP Flash Tool Procedures: Adobe Acrobat (PDF) Format

Step #1 Notes

    - These steps (a, b, c) are recommended so that the computer does not shutdown or go into a power save mode. They rule out any running programs that could conflict with the Flash Tool. They also make sure that the software (I.E. Drivers) for the USB-Link device are up to date.

    - Steps a, b, & c are written for computers running Windows 10. Prior versions of Windows may be similar. If you are running a different version of Windows than Windows 10, you may need to search the Internet or ask your IT Support person for assistance in making sure your computer does not go into a 'Power Save' mode and does not have any other programs running prior to performing the Flash Tool Procedure.